Full Manufacturing Process Software
CAD TRANSLATION SOFTWARE AND SERVICES

Outputs to most popular Assembly, AOI, and ATE Test Eequipment.

Translates your CAD, Gerber and BOM files into formats used to setup your manufacturing equipment or for import into other CAD systems. The Unisoft CAD to CAD translations software is available by subscription, purchase or rental or use our translation service. Import all types of CAD or Gerber files and BOM and export CAD files such as GENCAD, Fabmaster, PADS, ipc-d-356, ipc-2581, ipc2581, Mentor Graphics, etc.

NETLIST from GERBER only files — Video

DEMONSTRATIONS: The fastest way to learn about the Unisoft software is usually to go online with us and we can process one of your PC Boards or use our data files to show you the software. We highly recommend a hands-on demonstration and we are available now or virtually anytime to go online with you — contact us.

Online Meeting Demonstrations

Online meetings are usually the fastest way to learn about the Unisoft software. We can go online virtually anytime and process one of your PC Board projects or use our data files to show you the software.

To start a meeting, email us (enable JavaScript for our email addressservices.html) or call us (enable JavaScript for our phone number) and if we're available we will start the meeting right then OR you can set up a time for the meeting.

To start an online meeting the procedure is simple

  1. You call us (enable JavaScript for our phone number) to start the meeting.
  2. We normally use GoToMeeting for the online meeting. You'll click the "Join a Meeting" link there and enter the logon ID# we give you.

Unisoft CAD to CAD Translation Software Overview Diagram

pcb gerber viewer cad viewer software

VIDEO: Click the video above for product overview.


(Outputs to most popular Assembly, AOI & ATE Test Equipment. Also outputs to Gencad, Fabmaster, PADS, Mentor Graphics, ipc-d-356, ipc-2581, ipc2581, etc.)

Free PCB assembly / PCBA CAD Viewer &
Gerber Viewer Software

Email:  

The software download link and periodic updates will be sent to this address.
Please double check that your email address is correct. Your email address will be kept private.

gerber cad viewer software


Maybe you already have manufacturing software that you use to program production floor equipment, etc. but you need a way to convert newer or non supported cad file formats to this software. Unisoft can import virtually any CAD format and export a standard file for import to your existing manufacturing software. Output formats include GENCAD, Fabmaster, ipcd356, ipc-2581, ipc2581, Mentor Graphics, PADS .ASC, etc. For example Unisoft can import virtually any CAD file format and export to Teradyne/Genrad D2B Alchemist or Fabmaster Test Expert software. We can sell you this software for your use or can perform the conversion service for you and return the correct files to you.

NETLIST from GERBER only files — Video

A large number of Unisoft customers are Electronic Manufacturing Service providers (EMS/CEM) — see our Customers page for a partial listing and testimonials. Our Electronic Manufacturing Service (EMS/CEM) customers range from small start-ups to the largest contract manufacturers in the world such as Flextronics, Jabil Circuit, Sanmina-SCI, Benchmark Electronics, Plexus, etc., and are located in countries worldwide. We are proud that EMS providers choose Unisoft software because they have some of the highest technical board and box build manufacturing requirements, they have to without delay work with the variety of project data sources their customers provide which is at times sparse and error laden, they need to move product quickly and keep costs very low to bid competitively. Let us show you how we can do the same for you!

Free PCB assembly / PCBA CAD Viewer &
Gerber Viewer Software

Email:  

The software download link and periodic updates will be sent to this address.
Please double check that your email address is correct. Your email address will be kept private.

gerber cad viewer software


Unisoft offers in-house CAD and GERBER translation services. We translate your CAD, Gerber and BOM files into the correct formats used by you to quickly setup your manufacturing equipment. We also offer CAD to CAD conversion services.

Do you have special problems? For example: You do not have the native CAD files for your project. You only have the Gerber Files and a BOM (Bill Of Materials). You need to program production equipment such as Automatic Assembly Equipment, AOI Inspection Equipment or ATE Test Equipment (Flying Probe, In-Circuit or MDA) and you do not know where to turn — we can do it for you! We take your gerber files and BOM and create Gerber to Netlist and the X/Y data you need.

If you are at that point a possible next step in your evaluation is an online demonstration. For questions or to schedule a demonstration, call us (enable JavaScript for our phone number) or email us ().

NETLIST from GERBER only files — Video

Why Companies Choose Unisoft

IMPORTING CAD FILES: A list and samples of the CAD file formats Unisoft imports are on our Importing CAD Files page.

Click one of the links to the left or below for more information on our various services. Call us for details.

Customer Comments

Below are comments from a Unisoft client for a CAD Translation project Unisoft completed for them in November of 2005. The customer is Jim Wasilewski Test Manager at MPI (Microboard Processing Inc.) in Seymour, Connecticut (http://www.microboard.com/). MPI is a medium size contract manufacturer. Jim had two PC Boards with only the raw Gerber files available and needed to create full netlists, X/Y component and pin information, traces, etc. to program their Takaya Flying Probe Test Equipment to test the PC Boards.

"I have the programs loaded on the Takaya for both PC Boards. I am ready to start the debug …. Unisoft did a great job working together on this to get the translations completed."

Jim Wasilewski
MPI