381212-44-1 Inspect during ATE - Inspect LED For Proper Brightness 0.01 391822-01-2 Custom ATE Model Needed 25.00 391809-01-6 Custom ATE Model Needed 25.00 396051-01-4 Place Test Probes Here First - Connector 0.14 381200-66-4 Place Test Probes Here First - Test Points 0.1 386754-99-4 Place Test Probes Here First - Connector 0.16 381200-40-1 Place Test Probes Here First - Connector 0.23 395382-01-7 Place Test Probes Here First - Connector 0.17 395383-01-3 Place Test Probes Here First - Connector 0.17 391781-01-4 Pre-ATE Inspect - Check That Large Capacitors Have Correct Polarity - Capacitor 100UF_50V_20% 0.12 389148-06-7 Pre-ATE Inspect - Remove Jumper To Disable Crystal 0.03 391829-03-3 Testjet Required 0.27 390607-01-0 Testjet Required - PLCC44 I/O Controller 25.00 390579-03-3 Testjet Required - PLCC68, D/I Controller 25.00 391777-06-8 Capacitor 0.01UF_50V_20% 0.04 391777-08-4 Capacitor 0.22UF_50V_10% 0.05 385848-05-6 Diode 0.45 391818-06-6 IC 74HC14 0.22 391822-02-0 IC 74ACT16240 0.46 391822-03-9 IC 74ACT16374 0.49 395422-01-9 IC LLD251 - SOIC8 0.31 391770-02-0 Resistor 10K_2% 0.045 391727-10-9 Resistor 150K_1/8W_1% 0.035 391727-12-5 Resistor 2.21K_1/8W_1% 0.04 391729-02-0 Resistor 4.75K_1/4W_1% 0.04 391727-14-1 Resistor 10K_1/8W_1% 0.035 391727-13-3 Resistor 6.81K_1/8W_1% 0.04 391770-01-2 Resistor 6.8K_2% 0.04
More information:
For further details on features and operations contact Unisoft directly. Or from the Start Menu or from where you installed the Unisoft software please review the manual by clicking the "Pronto… Quick-Start Manual" in the Unisoft folder.